How to choose a good LED down light

    General household downlight maximum not exceeding 2.5 inches. LED lamp is one kind of energy saving and environmental protection lamp model, can be used as the ordinary lamp replacement, light than ordinary good, the only drawback is that if a bad 1, 2 light points can not be replaced. How to choose a good LED down light? You can refer to the following contents.
    Downlights surface cover material also divides a lot of kinds, iron, pure aluminum, die-casting and other materials, generally iron lamp price cheap, pure aluminum and die casting and other materials are more expensive, but more durable. Engineering downlight mostly iron cover material, but suggested that household LED downlight with not easy rusty surface cover.
    Lamp holder is a more important, the main material is ceramic lamp holder. The inside of the reed is the most important, with copper and aluminum sheet two, a good brand is used in aluminum sheet to do, and a spring is installed at the point of contact, can strengthen the contact. Power line also is the lamp holder, a good brand is to use three wire holder (three wire FireWire, Ling line, ground wire), and some will take wiring terminal, this is also the distinction between good brand and generic brand a very basic method. Reflecting cup general sand cup and the light cup two, material is aluminum, aluminum will not change color, and light reflecting degrees to better. Some small manufacturers will be to do with plastic spray technology, this new look good, but will darken over time, or even black. The identification method is to look at cutting the neat degree, aluminum cutting neat, spray the opposite.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) yjblog1509
The original address: http://www.sc-ledlights.com/news/news_show_4_22_203.html, reproduced please specify.

How to buy the candle LED lamp

     Look at the candle LED lamp packaging and trademarks. National mandatory LED lighting manufacturers in product packaging marked with the following: rated voltage, the voltage range, rated power, rated frequency. Generally speaking, the trademark printing quality of high quality products is good, clear font, not easy to fall off, wipe with a soft damp cloth, mark clearly discernible, not easy to erase, have manufacturers trademarks and related certification mark. Shoddy products printing quality is poor, the font fuzzy, easy to erase, no manufacturer's trademark and related certification mark.
     LED candle light appearance. High quality LED lamp manufacturers, general is the product mass production, the shape and size of LED candle lamp production of good consistency, to ensure product quality. At the same time the shell did not crack, loose, the seal should not be prized traces, the installation, disassembly process, lamp not loose, head tilt phenomenon.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) yjblog1509
The original address: http://www.sc-ledlights.com/news/news_show_4_20_202.html, reproduced please specify.

How to choose home LED ceiling lamp

     Some people in order to save money, not willing to invest in terms of lighting, each space average only install one or two home LED ceiling lamp, and LED ceiling lamp wattage is relatively small, caused by the indoor overall dark, make people prone to fatigue and depressed mood.
     Another is the lighting is too much, blinding light. The use of a large number of chandeliers, crystal lamps and other lighting, the light is too bright caused a great stimulus to the eye, if Home Furnishing decoration also use a lot of reflective materials, reflective light intense harm to human health more and more. So I recommend you to buy a wattage suitable LED ceiling light, but also to create a warm and comfortable atmosphere.
     In terms of lighting should be followed to warm tones, supplemented by the principle of cold tone. If proper fit between the LED ceiling fixtures, not only can satisfy the indoor lighting, but also produce a harmonious, peaceful, warm and even romantic atmosphere, I believe that there are many people like this kind of atmosphere.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) yjblog1509
The original address: http://www.sc-ledlights.com/news/news_show_4_22_201.html, reproduced please specify.

What are the features of the LED grille spot light

     LED grille lamp can be installed in the ceiling, cabinets. The features of LED grille spot light is the light from top to bottom local irradiation or free scattering, light source are merged in the lampshade, its modelling has tube type, sleeve type, flowerpot type, concave groove type, which are respectively arranged in the porch, sitting room, bedroom. For example, the installation of a sleeve type LED grille lamp in the sculpture above, can make the art more attractive, easy to watch. Home Furnishing lighting using LED grille lamp, Wattage shoulds not be too big, not dazzling.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) yjblog1509
The original address: http://www.sc-ledlights.com/news/news_show_4_20_200.html, reproduced please specify.

What are the advantages of the LED panel lighting

     LED panel lighting is a high-grade indoor lighting, the outer frame is made from anodized aluminum, the light source is LED, the entire lighting design beautiful and simple, luxurious atmosphere, not only has the good illuminating effect, and can give people the feeling is very good. Sourcechip LED panel light source design is unique, light can produce uniform plane light effect by the light guide plate of high light transmittance, illumination uniformity is good, the light is soft, comfortable and bright, can effectively relieve eye fatigue.
     The LED flat panel lighting applies to Office Area, hotel, bar, restaurant, Coffee hall, home interior decoration, such as indoor lighting, can directly replace the ordinary fluorescent lamp of the original, and the brightness is higher. With its high efficiency, energy saving, environmental protection, long-life advantages not only attracted the eyes of many consumers, but also for lighting professionals appreciated.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) yjblog1509
The original address: http://www.sc-ledlights.com/news/news_show_4_22_199.html, reproduced please specify.

LED track spot light is widely used in shopping malls

     Now you go into the relatively high grade of the shopping malls, you'll find out there are LED track spot light in those clothing store clothing exhibition. These clothes looks very colorful and gorgeous in the light. Track light black casing is solemn, track light white shell is elegant, these LED track light can focus on the display of clothing to attract customers, and the light can make people feel comfortable.
     A large number of commercial LED track light used in large shopping malls, not only can alleviate the pressure on electricity in large shopping malls peak, at the same time in energy saving prominent effect has been the attention of many shopping malls.  At present, many shopping malls owners are recommended to stay in the business to use LED lighting products, which also contributed to the large-scale application of LED track light.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) yjblog1509
The original address: http://www.sc-ledlights.com/news/news_show_4_20_198.html, reproduced please specify.