E27 led bulb light introduction

      LED bulb lamp is a new type of energy-saving lamps to replace the traditional incandescent bulbs. A bulb is composed of seven parts. In the top glass cover. The cover is stuck in the base. Base above will have a hole. The base is connected with the heat conducting seat. The heat conducting seat connected radiator. Connected with the lamp holder is the driving power supply. Light is lamp. The structure of e27 led bulb light incandescent lamp to relatively complex. Basically divided into light, drive circuit, heat radiating device. Together these parts to create low energy consumption, long life, high luminous efficiency and environmental protection LED bulb lamp products. So LED lighting products at present, is still high technological content of high-tech lighting products.
          Because the structure of LED bulb is more complicated than incandescent lamp, so even in the case of mass production, product prices will be higher than the incandescent lamp, now LED bulb price is higher than the electronic energy saving lamp. But as more and more people understand and accept, and slowly spread scale production, LED bulb price will soon reach the level of electronic energy-saving lamp. If you count a saving account, at the time of purchase will be found, even now the higher prices, based on a year of use, the initial purchase cost +1 electricity is lower than the incandescent lamp and electronic energy-saving lamp. LED bulb lamp current life can have up to 30000 hours.
      LED bulb characteristics:
      1. The shell adopts aluminium materials, has good heat dissipation performance.
      2. Using LED light source, low energy consumption, life of up to 3-5 million hours.
      3. High brightness LED light source, color, pure color, mixed color uniform, no spot. There are red, green, blue, yellow, white, double color, color and other colors portfolio selection.
      4. Convenient installation, method is roughly the same as incandescent lamp installation, projection angle. Dustproof, anti leakage.
      5. Working voltage 96~260VAC, for customers to choose.
      6. No mercury pollution is harmful to the environment, to achieve the green environmental protection.
      7. The lamp can be customized according to customer requirements.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_72.html, reproduced please specify

Square flat led panel ceiling lighting eight characteristics

       For the procurement of square flat led panel ceiling lighting of domestic and foreign consumers, compared with ordinary fluorescent lamp energy saving and environmental protection advantages Obviously, LED panel light, one of the biggest factors for product advantage is LED panel lights are usually configured ultra high brightness LED as light source. LED panel light is widely used for lighting in high-end hotels, theme bars, large restaurant, large Coffee hall, villa home interior decoration, interior architecture. Because the LED panel lamp brightness higher many advantages, has instead of the ordinary fluorescent lamp trend. All regions of the world and countries in all aspects of government are actively implementing the sustainable development LED lighting energy-saving lamp products, the trend of application of LED panel lamp is also very common.
       Advantages and characteristics of the product on the LED panel light concrete, only professional led light panel manufacturers to analyze and introduce its characteristics and application advantages to authority:
       1.  LED panel lights early in the product design is a very flexible technology live. LED is a point-like light, customers can design a variety of different shapes, the design is very flexible.
       2.  LED panel light emitting of lighting degrees higher and stronger. LED panel light using a reflective panel light evenly and sealed, made with high efficiency light guide plate and aluminum alloy materials. Uniform light-emitting effect.
       3.  LED panel lights produce less heat. LED panel light looks thin, heat-featured, low power, less heat.
       4.  LED panel lamp belongs to long service life lamp. The theory of LED life of up to 100000 hours. If calculated according to 8 hours a day, the theory of life in 27 years.
       5.  LED panel light lamp to change color and diverse ways, the installation can match freely. LED panel light according to different needs and environmental change regulation of light color, not only no radiation and glare, but also can protect vision, color more gentle.
       6.  LED panel lamp belongs to anti vibration ability of lighting products category. In the LED panel lamp, LED light source is a high hardness resin luminous body, not easy to damage, so the vibration resistance ability is relatively high, the environmental temperature adaptability.
       7.  LED panel light control ability. Control the LED light panel by an external controller dynamic program, can adjust the color temperature and brightness.
       8.  LED panel light low power consumption. At the same time, LED panel lights lighting technology is a green lighting technology, products do not contain mercury, less waste, the manufacturing process there is almost no pollution; semiconductor lamp can be recycled, Recyclable, plays an important role in economic and social sustainable development.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_71.html, reproduced please specify

Introduction of led cob down light source

    LED cob down light are using COB surface light source. COB light source can be simply understood as high power integrated light source. Light emitting area and the size of the light source can be designed according to the product structure.
    COB surface light source has the following characteristics:
    1. Electrical stability, lower attenuation, circuit design, optical design, thermal design is scientific and reasonable; the high thermal conductive metal substrate structure; automatic packaging process; the use of international advanced packaging materials.
    2. High color rendering, high luminous efficiency, light uniformity, no spot, healthy environment. High color light source close to the solar spectrum, does not change the illuminated object color, soft light, has a protective effect on visual acuity, is the ideal light source Home Furnishing, commercial and reading lighting.
    3. Simple installation, convenient use, reduce the difficulty of lighting design, processing and subsequent maintenance cost saving lamps.
    Cob light source is widely used in LED bulb, LED lamp cup, LED spot light, LED down light, LED lamp products, is an ideal light source for business, home, museums and other high-end lighting places.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_70.html, reproduced please specify

Detailed analysis of the led panel light housing

    Currently on the market, led panel light housing there are two: one is aluminum profile formed by NC machining, the other is zinc aluminum alloy formed by die casting, they both have their advantages and disadvantages, but I personally think that the profiles of the benefits of more than die casting. To analyze the.
    First of all, tell us about the zinc-aluminum alloy shell. Currently lamps cast zinc aluminum alloy shell thermal conductivity of about 80-90W/MK, together with its subsidiaries oxidation residues, such as electroplating and surface treatment or injection, the actual thermal conductivity is more narrowly, if the cast aluminum alloy AA1070 to LED housing , die casting heatsink is very thick, which resulted in the cooling area is very small, is not conducive to heat dissipation.
    Material for aluminum alloy 6063-T5, its excellent heat transfer rate is about 180 - 190W/M.K, heat sink can be made very thin, only 1 mm, thermal structure design unique, maximize heat area, making the products work for a long time under the condition of normal temperature, light body temperature can be kept below 50 ℃, thus effectively reducing bad light led ceiling panel light , but also to ensure that the lighting quality. According to the measured, lamp shell LED the same size, the cooling effect of sunflower radiator is improved more than 1/3 die cast housing.
    The appearance of the product according to the modern streamline design, consistent with the public aesthetic concept and creates the perfect classic appearance. In addition, LED sunflower radiator than the casting shell weight 1/3, especially LED lamp volume larger, export, freight can save a lot of!
    The advantages of casting is, if it is mass production, die casting production speed is very quick, low cost of production.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_69.html, reproduced please specify

Dimmable led panel light advantage

       LED panel light in 2011 fire up, its environmental protection, energy saving, high efficiency, long life advantages, not only attracted the eyes of many consumers, but also for the professional lighting people admire. Compared with the general lighting lamps, dimmable led panel light moderate price, but also has the light adjusting function, which make it more extensive applications. Compared with the energy-saving lamp, LED clearly has more advantages: small volume, low power consumption, long service life, high brightness, low quantity of heat, environmental protection, durable, high energy saving.
       1. Compared with ordinary lamps, the luminous flux of led ceiling panel light and higher. Integrated and modular LED lamp is very popular. Especially with the LED light effect of continuous improvement, LED panel light more anticipated future.
       2. Color is good. The LED panel lamp using LED light source high color phosphor package; using red or amber blue chip hybrid package, get high color rendering light source, so it's high color, more realistic color reproduction, when irradiated goods more bright.
       3. Good reliability. Dimmable led panel light with LED as light source, the LED cold light source with common source and incomparable advantage, especially in terms of reliability, the LED repair rate is low, long service life, excellent reliability.
       4. Although the dimmable led panel light price is higher than the ordinary lighting lamp, but in the long run, shopping malls, supermarkets and other lighting places long time lighting, lamps and lanterns, after a considerable period of time LED panel light by the savings in electricity will be more than ordinary lamps. LED panel lamp life is longer, LED panel light moderate price, without the need for frequent replacement, can save a lot of repair costs.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_68.html, reproduced please specify

LED ceiling lighting panel price decline

    Affected by the national energy-saving emission reduction policies, more and more office buildings, hotels, city lighting engineering lighting equipment upgrading willing to pay a high price. While the LED panel lamp energy saving lamp outstanding environmental performance and led ceiling lighting panel prices drop, therefore become the first choice goal.
    Since 2012, LED panel lights are more and more consumer attention, along with the rapid development of large-scale production of industrial technology and products, LED light panel prices also have a certain degree of adjustment, the market develops very quickly.
    Look at the results from the first quarter of this year, the LED panel light prices will continue to decline. The first quarter LED panel lights and LED lights and other indoor lighting products overall optical efficiency upgrade 12.3%, the average price fell 7.8%.
    LED is a huge potential sunrise industry, is energy saving industry, is in line with the Scientific Outlook on Development industry. With the decline in LED panel lamp price, its development trend in the future will be better.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_67.html, reproduced please specify

Safety Precautions led kitchen ceiling lights installation

     Led kitchen ceiling lights is a kind of lighting is essential Home Furnishing decoration, it can be installed in the kitchen, bathroom, living room, corridor and other places, is a new generation of energy-saving lamps, and efficient environmental protection. LED ceiling light installation is very convenient and simple, but if installed in special materials and environment, there are still some places that need attention, here to tell you about the installation of LED ceiling lamp safety precautions.
     1. LED ceiling light can not be directly installed in the flammable objects.
     2. LED ceiling lamp wires and connections between parallel wires connecting the cap firmly, good electrical contact should avoid because of poor contact between the wire and the terminal thrown sparks and dangerous.
     3. LED ceiling should check before installing lead wire core section of each lamp, copper cord is not less than 0.4 mm², not less than 0.5 mm² copper conductor, otherwise, the lead must be replaced.
     4. When using LED ceiling light expansion bolt if required, should be the choice of bolts technical requirements specifications, hole diameter and burial depth to match the bolt size.
     5. The number of LED ceiling light holder fixing bolt should not be less than a fixed number of holes on the lamp base and bolt diameter aperture should match.
     6. When ceiling mounted LED masonry structure, embedded bolts should be used, or with expansion bolts, nylon stopper or plastic stopper fixed.
     These precautions are for daily use and may encounter when installing LED ceiling lamps, installation and use of the right can not only prolong usage time, but will give families a more bright and beautiful light environment.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_66.html, reproduced please specify

Select the method of led corn light bulb

     Led corn light bulb is a member of the LED lamps, because the LED maximum luminous angle is 120 degrees, considering the light evenly, specially designed 360 degree light, its shape like Corn Cob, so called led corn lamp. Some manufacturers, will give LED corn lamp design a spherical lampshade, make it look like LED bulb.
     Buy LED corn light bulb, you can choose from the following points:
     1. LED corn light bulb light source. LED light source (also known as LED lamp beads) have domestic and imported lamp beads lamp beads (including the U.S. chip, chip, Japan, Germany, chips, etc.), but Taiwan lamp beads is the best for cost performance. Be sure to know what the lamp beads manufacturers use because different lamp beads, a large price gap. Imports more expensive LED lamp beads, in the production of customer specific requirements will generally use. Customers did not ask, the general use of Taiwan's lamp beads, good price. But there are bad manufacturers in order to profit, poor quality of light beads using cheat customers, saying it was imported lamp beads and so on.
     2. LED corn light bulb to light color consistency. At present, there are many small business package factory because there is no color resolution. According as lamp luminous color is different, so the quality is difficult to ensure.
     3. The production process of LED corn light bulb. Under normal circumstances is the use of fully automatic machine, exquisite workmanship, beautiful appearance, if the work is not good it is artificial to do their own, it is proved that the company strength is not strong.
     4. Shell material LED corn light bulb. General corn exhibit of lanterns made of aluminum lamp body and a plastic lamp holder. Aluminum is not only beautiful appearance and smooth, no rough sense, and good heat dissipation performance.
     5. LED corn light bulb brightness. Different brightness of the LED lamp price is different, the general brightness and highlight LED lamp prices have a certain gap. So the customer in the understanding must be clearly aware of their need is what the light, so as to be able to accurately positioning their products, to facilitate manufacturers give you an accurate price.    
     Finally, to remind customers to choose LED lamps do not blindly pursue low price cheap, low quality of some LED lamp time than traditional lamp of long life and high brightness, so also lost LED lamp of high brightness and long service life significance.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_65.html, reproduced please specify

150mm led down light use of effects in different scenarios

    The 150mm led down light is one kind of LED lighting, it has environmental protection, energy saving, high efficiency, long life, light color tunability and various advantages, wide range of applications. Lighting in the course of the operation is simple, instant light, low flicker, no lead and mercury and other harmful substances. Our products are widely used in homes, shopping malls, hotels and other places, is an ideal alternative to traditional lighting products.
    Sourcechip Opto-electrical Tech Co.,Ltd. is a LED down light Chinese wholesalers. Here we introduce you to 150mm led down light use of effects in different scenarios.
    1, hotel, guesthouses, hotel lighting. Hotels, guesthouses with LED downlight lighting, to bring customers a different experience, in addition to energy savings, but also full of luxury and warmth.
    2, museum, art museum and other places of lighting. The museum, art museum and other places belong to special occasions with higher requirements on lighting environment. Lighting source is not UV and heat radiation. LED downlight is cold light, ultraviolet light does not contain special requirements, can completely meet the museum, gallery of lighting.
    3, living room and home theater lighting. The LED lamp light color to set off a warm, harmonious, romance, embodied comfortable, casual atmosphere. Application of LED downlight lighting for Home Furnishing interpretation of another kind of significance.
    4, The conference room, multi-function hall lighting. LED downlight can be based on different needs, adjust the lighting environment meeting room or a multifunctional hall, serious and lively can freely set, LED downlight intelligent lighting can meet the different demand on light environment of the theme of the conference.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_64.html, reproduced please specify

8 inch recessed led down light introduction and application

    Energy saving: 8 inch recessed led down light electric energy into light energy efficiency up to 80%, saving more than 70% than the traditional lamp;
Service life: according to the half decay was calculated using life over 50000 hours, particularly suitable for long time lighting, high altitude is not easy to replace the occasion etc.;
    The light effect is good: soft light, color is good, quick start, no flicker;
Compatibility: LED downlight installation is fully compatible with the traditional downlight size;
    Wide input voltage: AC100-240V wide voltage design, power factor greater than 0.9;
    Convenient installation: no need to change the original lines, the installation is connected with the commercial power can be used directly;
    Green environmental protection: LED lamp without UV, infrared radiation, does not contain harmful substances such as mercury, less heat;
    Applications: LED down light outstanding performance in terms of energy saving, environmental protection and service life, and laid it at the advantages of large-scale indoor lighting applications; product is suitable for supermarkets, shopping malls, schools, hospitals, municipal buildings, exhibition halls, office, home, etc. indoor lighting.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_63.html, reproduced please specify

cob 30w led down light installation notes

    LED Downlight is an embedded inside the ceiling lighting, its most important feature is the ability to maintain the overall unity and perfect architectural, structural advantages of the use of hidden architectural interior light, LED light source is not exposed, does not irritate skin, eyes !
    Note the following when installing cob 30w led down light:
1, before installation, cut off the power, turn off the switch, in addition to prevent electric shock, please check the size of the installation hole whether it meets the requirements at the same time, check the wiring terminal and a power input line is connected firmly before installation, such as loose please lock after operation, otherwise it may lead to abnormal light lamp; lamp examination and installation of surface smoothness. If there are gaps, please make the appropriate adjustments.
2, storage requirements: LED down light for carton packaging, by severe mechanical impact and the sun and rain are not allowed in the transportation process, do not touch the bulb surface. Try not to be installed in the heat and corrosive gas!
3, According to the size of the installation hole mall after processing requirements, power line connected to the terminals of lamps, note the positive and negative pole. After wiring inspection installation is correct, the spring card stand up, and the light body into the mounting hole, forced upward, LED downlights can automatically go. Switch on the power, the lamp can work normally.
4, the installation site selection in no vibration, no swing, no fire hazards empty place, avoid high-altitude drops, hard object collisions, percussion. Long-term is not used in a dry and ventilated place!

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_62.html, reproduced please specify

Suitable occasion of cabinet led mini spot light

   The cabinet led mini spot light with LED as light source, usually installed in jewelry display cabinet or antique cultural relics display cabinets or clothing display cabinets etc.. The cabinet led mini spot light very penetrating, three-dimensional sense of strong. In jewelry display cabinet as an example, can close distance irradiation on jewelry, jewelry grade promotion, fully demonstrated the value of jewelry.
       The following parameters of LED Spot light GU10 SC-MR16B005S02:
       Lamp body:  aluminium alloy
       Diffusive lampshade:  light transmittance≥82%
       light source:   1W igh-power
       Driver:  wide Input driver
       Finish:  silver-gray
       Rated power:  4*1W
       Consume power:  5±1W
       Input Voltage:  AC 100-240V
       Output Voltage:  9-15V
       Input current:  300mA±5%
       Efficiency:  ≥72%
       P.F:  ≥0.5
       Lighting CRI:  ≥70/≥80
       Working Temp.:  -10℃~40℃ / R.H.≤85%
       Storage Temp.:  -30~65℃
       Life span:  25,000 HR
       IP Rate:  IP20
   Product features: high efficiency, environmental protection, energy saving, no radiation, no glare, excluding ultraviolet and infrared, jewelry without causing damage.
   Applications: jewelry cabinet, cosmetic counters, cabinets luxury watches, fine cabinets, shop counters, glass cabinets, heritage display cabinets, medicine cabinets, bar counter and so on.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_61.html, reproduced please specify

The size of square led ceiling light

     LED panel light-emitting properties of subversion of the traditional light source, with its thin, surface-emitting, energy saving, environmental protection, health and other features wonderful debut, is the first choice for home and office and advertising lamps. The square led ceiling light regular size: 200 * 200MM, 300 * 300MM, 400 * 400MM, 500 * 500MM, 600 * 600MM, 150 * 1200MM, 300 * 600MM, 300 * 1200MM, 600 * 1200MM. From the power point of view, the conventional LED panel lights are: 9W, 10W, 12W, 18W, 24W, 36W, 42W, 50W, 72W, 80W.
     This is the two square LED ceiling light size map produced by the company:

595*595MM LED panel light

                   

1195*295MM LED panel light

    The company's Square panel light have the following features:
1, energy efficient: energy saving, high brightness, no infrared, ultraviolet radiation, no thermal effect, no radiation, no flicker;
2, uniform and bright light: bright light completely flat output, emitting angle is wider;
3, thin and light: Special circuit design, avoiding the single broken LED influence the overall results;
4, stable and durable: 8-10 years period of use, not radio interference, does not pollute the environment;
5, LED ultra-low temperature, to ensure the long life of LED pad at a temperature only 10 degrees higher than the ambient temperature;
6, low thermal design to ensure maximum LED itself dissipate heat, LED pad thermal resistance of the shell is only 0.05 ℃ / W;
7, the LED array connection design, the LED to minimize the risk of failure to make lamps have a longer life.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_60.html, reproduced please specify

The application range of 15 watt led down light

     LED down light does not occupy the indoor space, indoor installation of LED down light, because the secrecy of lamps and lanterns, will not have the feeling of oppression, but will feel very warm. 15 watt led down light generally in the hotel, office, shopping, family Coffee use more.
     LED down light in indoor lighting has strong applicability, but also because it has many other advantages.
1, the use of LED down light to make home more beautiful. Will help the overall unity and perfect maintain indoor decoration, not destroy the chandelier lamps installed, hidden in the decoration of the interior light, no glare, the visual effect of LED light source to be more gentle, uniform.
2, energy saving LED help households to reduce electricity costs: the same as ordinary energy-saving lamp brightness power 1/4, a LED down light can save electricity a few yuan a month for a family.
3, the 15 watt LED down light not fragile, Recyclable, strong environmental protection: do not contain mercury and other harmful substances, no pollution to the environment. And the energy saving, equivalent to reducing carbon emissions. The promotion with the family "energy-saving emission reduction" philosophy of life.
4, the longevity of 15 watt LED down light: LED lamp life of 50000 hours, six hours a day, is a life span of 20 years. To reduce the purchase cost of lamps and lanterns.
     Now more and more office and family on the use of LED down light. Because of the more and the applicability of the LED down light used in indoor lighting more people know, more and more people are also welcome. LED down light with some other lamps are incomparable, or even other LED lamps are incomparable.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_59.html, reproduced please specify

The led flush mount ceiling light purchase skills

    The purchase of the led flush mount ceiling light, can according to the following four points to select.
    1, life. Quality LED Ceiling average life were about 40,000 to 50,000 hours, you can use two to three years, several times higher than the ordinary energy-saving lamp life and low energy consumption, is the preferred energy-efficient lighting, inferior panel lamp life may be only a fraction of one or a few very high-quality products, and the light fades serious.
    2, the energy consumption. High-quality energy-saving LED ceiling light, LED ceiling light quality equivalent to the ordinary energy-saving lamps 5W 15W. Compared to incandescent-quality LED Downlight (bulbs) can save energy 80%, compared to halogen powder lamp, that is, we often say that the poor quality of energy-saving lamps, energy savings of 44%.
    3, the price. LED ceiling light for its different power sizes, as well as differences in levels of light and color, the price vary. Quality LED ceiling light is generally higher prices, more than 300 yuan, inferior workmanship rough-made products, the price is cheaper.
    4, material. High quality led ceiling panel light are made ​​using high-power high-brightness LED, light color high brightness strong, real illuminated objects, which can effectively protect the eyes; while the poor light they use poor price, low quality LED as the light source, which light color blue, the color of the illuminated object is poor, low brightness, blurred vision.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_58.html, reproduced please specify

What is the meaning of e27 led light bulb?

    The e27 led light bulb refers to the technical specifications are E27 LED bulb. Lamp holder used interface has many types, such as E27, E14, GU10 etc.. They are behind the figures to show that the interface size (mm). MR16, PAR16 refers to the cup type, behind the figures to show that the cup size (1/8 inch).
    E27 and GU10 refers to the different types of lamp holder. E27, E26, E14, E12, these E beginning usually: screw lampholders. E27 refers to the threaded hole diameter is 27mm screw cap, E14's thread diameter is 14mm screw cap.
    GU:G type lamp cap is inserted, the U said the cap portion presents U shape, behind the figures to show that the pin center distance (unit: mm "mm"). GU10 and GU5 are two round pin, the GU10 pin center for 10mm, commonly used in high pressure lamp, while the GU5 pin center for 5.33mm, often used for low-voltage lamp.
    MR:Multiface Reflect, multiple reflection (cup), behind the figures to show that the cup diameter (unit 1/8 of an inch), MR16 diameter =16 x 1/8=2 inch = 50mm MR16 common lamp cup GU5.3 (fine pin) and GU10. If you use E27, usually called PAR16.
    Commonly used household lamp holder many of them are E27. In the structure of LED bulb, lamp holder will design specifications into E27, can be very good to use in the family in general lighting.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_21_57.html, reproduced please specify

LED ceiling panel light installation considerations

    The LED ceiling panel light is mounted on the ceiling of the LED panel light. When mounted on a white ceiling, the entire ceiling was the same color, very beautiful, clean, coordinated, will not damage the lamp setting perfect unity ceiling art. Its most prominent feature is the ability to maintain the overall architectural unity and perfect, advantages in the structure is the use of hidden architectural interior light, LED light source is not exposed, does not irritate the eyes.
    When installing led ceiling panel light, we should note the following:
1.Due to the different capacity of the ceiling, so in some cases require the use of screws lamps.
2.As the illuminations are heavier, during installation, please notify engineering personnel (eg electrician) in accordance with the hardness of the forces of smallpox and procurement expansion screws bolt or screw lengthened reinforcement, install the corresponding force screws.
3.LED ceiling lights are electrical products, the installation must have experience and related documents please professional electrician to help assist in the installation, in order to avoid unnecessary accidents.
4.Before installing the led surface panel light on the circuit for inspection, so as to avoid the leakage phenomenon, cause personal safety, install to find a professional electrician before installation, not to secretly installed.
5.Ensure that the lamp operating voltage before to make sure the lamp is powered lamp operating voltage is correct, incorrect connection of the lamp voltage may cause permanent damage.
6.Installation of LED ceiling light should be avoided in the heat and hot steam, corrosive gases, to avoid affecting life.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_56.html, reproduced please specify

What is the led surface panel light?

    LED panel light is a high-grade indoor lighting lamps, the outer frame is made of aluminum alloy, LED light source, the entire lighting design beautiful and simple, luxurious atmosphere, not only have good lighting effects, and can bring the feeling of beauty. Design of led surface panel light is very special, light through the light guide plate with high light transmittance ratio after the formation of a uniform plane light effect, illumination uniformity is good, the light is soft, comfortable and bright, can effectively alleviate eye fatigue. LED panel light can radiation proof, pregnant women, the elderly, children will not stimulate the skin.
    LED surface panel light components are: panel light aluminum frame, LED light source, LED light guide plate, LED diffusion plate, reflective paper, cover plate, driving power supply, install pendant. From the angle of quality control, can invest the money in the performance optimization of LED light and LED light guide plate, from the marketing point of view, can invest the money in improving aluminum frame cover pendant products grade.
    Because the advantages of LED panel light, it is very suitable for hotels, bars, restaurants, Coffee hall, home interior decoration, such as indoor lighting, can directly replace the ordinary fluorescent lamp of the original, and its higher brightness.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_21_55.html, reproduced please specify

China led bulb lights price Situation

    It is understood, LED lamps and energy saving lamps are rapidly narrowing spreads. LED lights compared to traditional light sources, while having the advantage of low energy consumption and long life, but its high price has become an important cause of the outbreak hampered demand for LED lights. But over the past two years due to a significant decline in the LED chip and packaging costs, LED lights also will appear the price dropped significantly.
    Compared with the overseas market China led bulb lights prices generally lower, at present the domestic part of the brand's 5W LED bulb is the lowest price has dropped to 35 yuan ($6.29), and with 13W CCFL energy saving lamp similar brightness of the price is about 11-15 yuan, LED lights and energy saving lamps is rapidly narrowing sales price.
    Of course, LED products in the China marketing is not Everything is going smoothly. The biggest problem is the price of the chaotic system. Chaos price competition to the quality of the products has a lot of problems, process rough and cut corners, which give consumers the use effect is not good, and even some hidden security troubles.So when the choose and buy LED bulb lamp, should not only seek low price products, choose the professional, regular led light panel manufacturers produced the bulb lamp, LED bulb quality will be guaranteed.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_54.html, reproduced please specify

5w led ceiling light equivalent to 15W energy saving lamp

    In the background of the global low carbon economy, LED ceiling light market were high hopes.LED ceiling light efficiency higher, longer life, color is also very good, which makes it far beyond the other products, to win more people's concern and love.In terms of energy consumption, high quality LED ceiling lamp energy saving, high quality 5w led ceiling light is equivalent to the ordinary energy-saving lamps 15W. High quality LED ceiling lamp compared to incandescent bulbs 80%.
    LED eiling light monochromatic good, common colors include red, green, yellow and orange, the color can be changed by changing the current.LED no ultraviolet and infrared radiation, so as not to attract mosquitoes, make the environment more clean and sanitary and clean.Do not contain mercury, lead and heavy metals, is conducive to environmental protection.
    Because of the characteristics of LED light, LED rapid development from the first signal indicating to today's car headlights, LED displays, lighting (LED ceiling light, etc.), regardless of the technology or application point of view, there are a lot of progress.LED is the future development direction of lighting, it caused a new lighting technology revolution, along with the LED ceiling light craft and technology progress, it must play a greater advantage, to replace the incandescent lamp lighting will point the day and await for it.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_53.html, reproduced please specify

What are the characteristics of led up down light

     LED lamp is made with high brightness LED light emitting diode as the light source, low voltage constant current drive, safe and reliable, less power consumption, long service life. The following characteristics of led up down light:
     1, energy-saving: equal power LED lamp power consumption is only 10% of incandescent lamp, energy-saving lamps of 1/4.
     2, long service life: LED lamp beads can work 50000 hours, longer than fluorescent and incandescent lamps.
     3, adjustable light: dimmer before has been for incandescent lamps, incandescent lamp dimming the light red; fluorescent lamp dimmer is rare, this is the main reason of dimming technology for many years no development; now LED can also adjust the light, and no matter how changes in brightness, the color of the light are the same (color temperature is essentially the same), which is much better than incandescent lamp.
     4, can frequently switch: LED lifetime is calculated according to lit, even thousands of times per second switch does not affect the LED life, in situations that require frequent switching, LED lamp has the absolute advantage.
     5, color rich: there are white, warm white, red, green, blue and other colors, whether it is the living room lamp beside for small dotted lights or neon light, very bright.
     6, low heat: many 220V downlight because heat large, easily broken. Although the 12V halogen lamp heating value below 220V downlight, due to its lack of power transformer, its brightness is less than the nominal value. LED downlight, even without transformer, can work for a long time.
     7, environmentally friendly, no mercury (Hg) and other substances harmful to the environment, without causing damage to the environment. LED lamp assembly parts can be very easy disassembly. LED does not contain infrared, ultraviolet, so it will not attract insects.
     8, good color: than traditional lamp light can be more close to the white light, in this light, the color of the object can be more close to the nature.
     LED up down light is mainly used for the single building, historical buildings exterior lighting, landscape lighting, light outside the building through the lighting lighting, advertising lighting and other special facilities, and bars, dance halls and other entertainment atmosphere, lighting etc.. How to choose the led up down light on, you can refer to this article: how to judge the quality of LED down light.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_21_52.html, reproduced please specify

Brief introduction of COB led ceiling light

     COB led ceiling light is a fine classification LED ceiling lamp, the light source is named for COB package. COB led ceiling light with a new ceiling light aluminum alloy and patent structural design and production technology of high thermal conductivity.
     The so-called COB package, is the direct chip binding package on the substrate, with good heat dissipation, light a small decline. The COB package can eliminate the dot effect, performance for the surface light source shine together, even and soft light.
     We produce LED down light F series down light SC-DLB012W01 is a kind of embedded into the lighting ceiling light emitter type. Not because the lamps installed ceiling and destroy the beauty of art. Overall, unified and perfect its biggest characteristic is to maintain the architectural decoration, the structure has the advantages of using the source is hidden inside the building decoration, the LED light source is not exposed, not to stimulate the skin!

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_51.html, reproduced please specify

China professional led light panel manufacturers

    Since the LED is developed, it will be gradually integrated into our lives. Now, we have large and small towns, the figure could be seen everywhere LED, LED has become our integral part of life is not, and therefore in the LED industry, more and more people. Sourcechip is one of Chinese professional led light panel manufacturers.
    Sourcechip created since 2001, focusing on the development of LED products. After years of painstaking research and exploration, Sourcechip LED products not only types of models, good quality, and has its own unique characteristics. Sourcechip of LED products: LED panel light, LED down light, LED track light, LED ceiling light, grille down light, LED tube, LED bulb, LED Spot light, LED par light. Able to fit a variety of different scenarios and different lighting requirements.
    Sourcechip always put the interests of customers in the first place, and constantly improve themselves, to provide quality customer service and high quality products, and continue to develop more new LED optoelectronic products to meet the needs of our customers.

bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_46.html, reproduced please specify